Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

MultiTech MT2834ZDXI handshake when sending fax? ^S^Q^S^Q characters




I have a little problem when sending with MT2834ZDXI using rtscts. 
The transfer is OK but after sending the page I receive 
handshake characters. It seems that sending is done with 
software handshaking. I've tried with ModemAnswerFaxBeginCmd: "<xon>"
but no success. Also tried AT&E7 command. 

Any idea or suggestion?

Example:
...
Feb 09 18:43:11.96: [ 1246]: <-- data [136]
Feb 09 18:43:11.96: [ 1246]: SENT 25736 bytes of data
Feb 09 18:43:11.96: [ 1246]: <-- data [2]
Feb 09 18:43:11.96: [ 1246]: SEND end page
Feb 09 18:43:13.90: [ 1246]: -->
[36:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q]
Feb 09 18:43:13.90: [ 1246]: --> [2:OK]
Feb 09 18:43:13.90: [ 1246]: SEND send EOP (no more pages or documents)
Feb 09 18:43:13.90: [ 1246]: <-- [9:AT+FET=2\r]
Feb 09 18:43:17.92: [ 1246]: --> [7:+FPTS:1]
Feb 09 18:43:17.92: [ 1246]: SEND recv MCF (message confirmation)
...

Leon Kos, CAD lab, Mech.Eng., University of Ljubljana, Slovenia
(http://www.lecad.uni-lj.si/people/Leon.Kos/)



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services