Re: flexfax: faxstat Modem line

[Matthias.Apitz@SOFTCON.de]

Manfred Liebchen wrote:
    
    Missing modemline modem running in faxstat output:
    
    I have installed (HylaFAX (tm) Version 4.0beta020 on my SunOS 5.5.1 
    Generic_103640-14 sun4m sparc SUNW,SPARCstation-5 system usinf port /dev/cua/b
    for my modem connection; I am using a zyxel modem U1496E with V 4.05 release.
    

BTW: The firmware version of the modem is a little bit outdated.

    Modem connection seems to work:
    
    bash# cu -l /dev/cua/b
    Connected
    atil0
    U1496E  V 4.05    
    
    OK
    at+fclass=?
    0,2
    OK
    ~.
    Connection closed.
    
    Connection to hfaxd dito:
    
    root@nosi$ telnet localhost 4559
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 nosi.rrz.Uni-Koeln.DE server (HylaFAX (tm) Version 4.0beta020) ready.
    quit
    221 Goodbye.
    Connection closed by foreign host.
    
    But using faxstat, i didnt see any modem running line !!
    
    root@nosi$ ./faxstat -v
    Trying localhost (127.0.0.1) at port 4559...
    Connected to localhost.
    220 nosi.rrz.Uni-Koeln.DE server (HylaFAX (tm) Version 4.0beta020) ready.
    -> USER root
    230 User root logged in.
    -> PORT 127,0,0,1,133,203
    200 PORT command successful.
    -> LIST status
    150 Opening new data connection for "status".
    HylaFAX scheduler on nosi.rrz.Uni-Koeln.DE: Running
    226 Transfer complete.
    
    
    I think  that the faxstat output should contain a line like
    Modem cua/b (#...): Running and idle
    
faxstat(1) will only display the status of the modem if a
faxgetty(1M) proc is running for that modem. Do you run
a faxgetty(1M) for that line?

	matthias

    What may be wrong ? Any hints are welcome
    Thanks in advance M. Liebchen

>Received: (from john@localhost) by johncon.johncon.com (8.6.12/8.6.12) with UUCP id XAA03735 for flexfax@sgi.com; Sun, 11 Jan 1998 23:48:51 -0800
Date: Sun, 11 Jan 1998 23:48:51 -0800
Subject: flexfax: Class 2.0 and USR Sportster
From: John Conover <conover@netcom.com>
To: flexfax@sgi.com
Sender: owner-flexfax@celestial.com


I have a 33.6 USR Sportster, and:

Class2NRCmd:            AT+FNR=1,1,1,0

Doesn't seem to work for Class 2.0 (I still get Unspecified Phase B
Transmit errors.) Is the 56K different?

	Thanks,

	John

-- 

John Conover, 631 Lamont Ct., Campbell, CA., 95008, USA.
VOX 408.370.2688, FAX 408.379.9602
conover@netcom.com