flexfax: Question ?

[Kai Schmidt <kschmidt@nagold.netsurf.de>]

Hello,

I am running Hylafax with a ZyXEL 1496 E, I have some problems sending faxes
to paper fax machines.When I send to machines having A4 papers I get the
followinf error.

BTW I use WHFC.


===== end of log file ========

Jan 06 22:35:32.31: [ 1436]: SEND end page
Jan 06 22:35:39.61: [ 1436]: -->
[196:


]
Jan 06 22:35:39.61: [ 1436]: --> [2:OK]
Jan 06 22:35:39.61: [ 1436]: SEND send EOP (no more pages or documents)
Jan 06 22:35:39.61: [ 1436]: <-- [9:AT+FET=2\r]
Jan 06 22:35:55.56: [ 1436]: --> [8:+FHNG:50]
Jan 06 22:35:55.56: [ 1436]: REMOTE HANGUP: Unspecified Transmit Phase D
error,
including +FPHCTO timeout between data and +FET command (code 50)
Jan 06 22:35:55.56: [ 1436]: <-- [5:ATH0\r]
Jan 06 22:35:55.56: [ 1436]: --> [2:OK]
Jan 06 22:35:55.56: [ 1436]: MODEM set DTR OFF
Jan 06 22:35:55.58: [ 1436]: SESSION END

====== cut here =======

When initializing the modem I get the following information

====== cut here =====

Jan 06 22:32:35.73: [ 1436]: <-- [10:AT+FTBC=0\r]
Jan 06 22:32:35.74: [ 1436]: --> [2:OK]
Jan 06 22:32:35.74: [ 1436]: <-- [10:AT+FBOR=0\r]
Jan 06 22:32:35.75: [ 1436]: --> [2:OK]
Jan 06 22:32:35.75: [ 1436]: <-- [13:AT+FPHCTO=30\r]
Jan 06 22:32:35.77: [ 1436]: --> [5:ERROR]
Jan 06 22:32:35.77: [ 1436]: MODEM Command error
======= cut ========

What the h... is AT+FPHCTO, where does it come from ?

And I still can't read incoming faxes. When I use kfax to look at them it is
unreadable, when I use xv, some "fat" printed parts are readable, but not
all, I tried to get viewfax, but ftp.sgi.com is unreachable at the moment.

The most severe point is the sending, as I said I am running an ZyXEL 1496E
software 6.10 M.



Bye!

- Kai Schmidt -
kschmidt@nagold.netsurf.de
http://www.herrenberg.netsurf.de/~kschmidt