flexfax: MT 2834 BL problem

[Paulo J V Wollny <paulo@wollny.com.br>]

Hi,

I posted a question yesterday.
Despite of having added the ModemClass: "any: cua0" to the config
file, I'm still having problems trying to send faxes. The modem is
Mutitech 2834BL, and the error is allways REMOTE HANGUP. Trying from 
a "normal" fax machine, I can fax to the number I'm trying. Any 
headlight?

Best regards

Paulo J V Wollny 

Debug Listing following:

Dec 18 19:52:10.36: [ 8077]: SESSION BEGIN 00000017 17144414848
Dec 18 19:52:10.36: [ 8077]: SEND FAX: JOB 4 DEST 0017144414848 COMMID 00000017
Dec 18 19:52:10.36: [ 8077]: DELAY 2600 ms
Dec 18 19:52:12.97: [ 8077]: <-- [15:ATE0V1Q0S0=0H0\r]
Dec 18 19:52:13.18: [ 8077]: --> [14:ATE0V1Q0S0=0H0]
Dec 18 19:52:13.18: [ 8077]: --> [2:OK]
Dec 18 19:52:13.18: [ 8077]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Dec 18 19:52:13.35: [ 8077]: --> [2:OK]
Dec 18 19:52:13.35: [ 8077]: <-- [12:AT+FCLASS=2\r]
Dec 18 19:52:13.51: [ 8077]: --> [2:OK]
Dec 18 19:52:13.51: [ 8077]: <-- [10:AT+FTBC=0\r]
Dec 18 19:52:13.67: [ 8077]: --> [2:OK]
Dec 18 19:52:13.67: [ 8077]: <-- [10:AT+FBOR=0\r]
Dec 18 19:52:13.83: [ 8077]: --> [2:OK]
Dec 18 19:52:13.83: [ 8077]: <-- [13:AT+FPHCTO=30\r]
Dec 18 19:52:13.98: [ 8077]: --> [2:OK]
Dec 18 19:52:13.98: [ 8077]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Dec 18 19:52:14.08: [ 8077]: --> [2:OK]
Dec 18 19:52:14.08: [ 8077]: <-- [7:ATL0M1\r]
Dec 18 19:52:14.14: [ 8077]: --> [2:OK]
Dec 18 19:52:14.14: [ 8077]: <-- [12:AT+FCLASS=2\r]
Dec 18 19:52:14.29: [ 8077]: --> [2:OK]
Dec 18 19:52:14.29: [ 8077]: <-- [10:AT+FTBC=0\r]
Dec 18 19:52:14.43: [ 8077]: --> [2:OK]
Dec 18 19:52:14.43: [ 8077]: <-- [10:AT+FBOR=0\r]
Dec 18 19:52:14.59: [ 8077]: --> [2:OK]
Dec 18 19:52:14.59: [ 8077]: <-- [13:AT+FPHCTO=30\r]
Dec 18 19:52:14.73: [ 8077]: --> [2:OK]
Dec 18 19:52:14.73: [ 8077]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Dec 18 19:52:14.89: [ 8077]: --> [2:OK]
Dec 18 19:52:14.89: [ 8077]: <-- [27:AT+FLID="Paulo J V Wollny"\r]
Dec 18 19:52:15.03: [ 8077]: --> [2:OK]
Dec 18 19:52:15.14: [ 8077]: DIAL 0017144414848
Dec 18 19:52:15.14: [ 8077]: <-- [19:ATDT0017144414848@\r]
Dec 18 19:52:27.12: [ 8077]: --> [5:+FCON]
Dec 18 19:52:28.50: [ 8077]: --> [78:+FNSF:00 00 25 01 20 45 56 49 54 55 43 45 58 45 20 52 45 4E 4E 55 52 59 41 44 ]
Dec 18 19:52:28.50: [ 8077]: REMOTE NSF "00 00 25 01 20 45 56 49 54 55 43 45 58 45 20 52 45 4E 4E 55 52 59 41 44"
Dec 18 19:52:28.50: [ 8077]: --> [28:+FCSI:"       714 441 4848 "]
Dec 18 19:52:28.50: [ 8077]: REMOTE CSI "714 441 4848"
Dec 18 19:52:28.61: [ 8077]: --> [21:+FDIS:1,3,0,2,1,2,0,3]
Dec 18 19:52:28.61: [ 8077]: --> [2:OK]
Dec 18 19:52:28.61: [ 8077]: REMOTE best rate 9600 bit/s
Dec 18 19:52:28.61: [ 8077]: REMOTE max page width 1728 pixels in 215 mm
Dec 18 19:52:28.61: [ 8077]: REMOTE max unlimited page length 
Dec 18 19:52:28.61: [ 8077]: REMOTE best vres 7.7 line/mm
Dec 18 19:52:28.61: [ 8077]: REMOTE best format 2-D MR
Dec 18 19:52:28.61: [ 8077]: REMOTE supports T.30 Annex C, half duplex ECM
Dec 18 19:52:28.61: [ 8077]: REMOTE best 10 ms/scanline
Dec 18 19:52:28.61: [ 8077]: USE 9600 bit/s
Dec 18 19:52:28.61: [ 8077]: USE 10 ms/scanline
Dec 18 19:52:28.61: [ 8077]: SEND file "docq/doc4.cover;30"
Dec 18 19:52:28.66: [ 8077]: USE page width 1728 pixels in 215 mm
Dec 18 19:52:28.66: [ 8077]: USE unlimited page length 
Dec 18 19:52:28.66: [ 8077]: USE 3.85 line/mm
Dec 18 19:52:28.66: [ 8077]: USE 1-D MR
Dec 18 19:52:28.66: [ 8077]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,3\r]
Dec 18 19:52:28.93: [ 8077]: --> [2:OK]
Dec 18 19:52:28.93: [ 8077]: <-- [7:AT+FDT\r]
Dec 18 19:52:33.00: [ 8077]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Dec 18 19:52:33.00: [ 8077]: --> [7:CONNECT]
Dec 18 19:52:33.00: [ 8077]: SEND wait for XON
Dec 18 19:52:35.90: [ 8077]: --> [1:]
Dec 18 19:52:43.02: [ 8077]: <-- [6:AT+FK\r]
Dec 18 19:52:45.19: [ 8077]: --> [7:+FHNG:2]
Dec 18 19:52:45.19: [ 8077]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Dec 18 19:52:45.64: [ 8077]: --> [2:OK]
Dec 18 19:52:45.64: [ 8077]: <-- [5:ATH0\r]
Dec 18 19:52:45.78: [ 8077]: --> [2:OK]
Dec 18 19:52:45.78: [ 8077]: SESSION END