flexfax: Re: Still having problems with Zyxel 1496

[Andreas Busse <ab@ivm.net>]

On Tue, 14 Oct 1997, Andreas Busse wrote:

Hi again,

sorry for bothering you all again... I solved the problem. 
Well, not really, but it's at least a satisfying solution.

German users with Zyxel 1496EG+ modems: Get an old dusty 1496E.
That works ;-)

Cheers,
Andy

> 
> Hi again,
> 
> I still have problems with Hylfax 4.0pl1 and a Zyxel 1496EG+.
> 
> As reported already, transmission to certain fax machines fail
> with an error after issueing the MPS (more pages, same document)
> command. 
> 
> Someone told me to use the config line
> 
> Class2DCCQueryCmd:     "!(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)"
> 
> This doesn't work. Actually, instead of a RTN pass, the remote modem
> now hangs up. Which obviously has the same effect: 3 retries, and
> no success.
> 
> In the meantime, I took a look at the FAQ and use the following
> 
> Class2DCCQueryCmd:      "!(0,1),(0-7),(0-4),(0-2),(0),(0),(0),(0-7)"
> 
> which doesn't work either. 
> Is there any description of the Class2DCCQueryCmd that is more
> informational than just "use this one if you have trouble with..." ?
> 
> Also, someone told me to disable ECM at all and recompile Hylafax.
> How can I disable ECM? Is there any config oder include file
> or do I really need to go into the source? The last time I had to
> do this was with Hylafax 3.0-don't-know-anymore and it wasn't very 
> exciting....
> 
> Any recommendations welcome. Really :-(
> 
> Cheers,
> Andy