Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: WHFC spooling




Yes I'm faxing the same document again and again. Sometimes WHFC gives a
message like "Insane Time on faxspool". Is this a normal message?  

Salih
saliht@dut.net.tr


On Fri, 20 Jun 1997, Roberto Sgarbi wrote:

> 
> I'm using the "Apple LaserWriter" postscript driver attached to
> D:\TMP\FAXSPOOL File, A4 page dimension and "Archive" postscript format. The
> job timeout is999.
> Maybe the WM_SPOOLERSTATUS message sent by Windows 95 to WHFC doesn't work
> every time. On my PC, i have a "faxspool" file on drive D: because the
> drive is a bit faster than C: and it allow me to fax 7 or 8 pages instead of 5
> or 6; but I never seen exactly what you describe (only 1 of 2 faxes despooled). 
> Are you faxing the same short document?
> 
> Roberto
> 
> At 19.12 19/06/97 +0300, you wrote:
> >Hi,
> >
> >Thank you for your help. I have tried this. But this time there is another
> >problem. I am sending a fax for the first time. It is ok. After a while
> >I'am sending another fax. And it doesn't work. I am trying to send another
> >fax then. And popup window comes up. After that I'am trying again and it
> >doesn't work again and saying "no valid file c:\windows\faxspool spooled".
> >I mean I can only send one of two faxes.
> >
> >I've tried to delete the faxspool file and it worked. But it is boring
> >to delete spool file before sending each fax.
> >
> >Can you send me your printer configuration. Job timeout, datatype etc.
> >
> >Thanks,
> >
> >Salih Tilkici
> >saliht@dut.net.tr
> >
> >
> >On Thu, 19 Jun 1997, Roberto Sgarbi wrote:
> >
> >> At 15.13 19/06/97 +0300, you wrote:
> >> >Hi,
> >> >
> >> >I have the same problem too. I can send one fax after installing WHFC for
> >> >the first time.  When I try to send a second fax WHFC does'nt pop-up and I
> >> >can see an error message from WHFC windows saying "No valid file:
> >> >c:\windows\faxspool".  So I can't fax.  
> >> 
> >>   You can solve the problem by erasing the final back-slash (\)
> >>   in the [WHFC] section of WIN.INI file. 
> >>   But use a text editor, not WHFC!
> >>   
> >>   In my Win.ini file, i.e.:
> >> 
> >>         [WHFC]
> >>         SpoolDir=d:\tmp
> >>         SpoolFile=faxspool
> >> 
> >>   regards,
> >> 
> >>         Roberto.
> >> 
> >> >
> >> >I have to use a client to send fax because I'm using a Linux box as server
> >> >and I can't send faxes in Turkish from e-mail to fax gateway. Fax goes in
> >> >a bad format when it includes Turkish characters.
> >> >
> >> >How can I solve this problem. 
> >> >
> >> >Regards,
> >> >
> >> >Salih Tilkici
> >> >saliht@dut.net.tr
> >> >
> >> >
> >> >On Wed, 18 Jun 1997, Roberto Sgarbi wrote:
> >> >
> >> >> hello all,
> >> >> 
> >> >> Setting "start print after last page is spooled" in the spooler setting 
> >> >> of a W95b ita version, or modifying the Postscript job timeout, 
> >> >> I can't set up a full working WHFC client on W95.
> >> >> (maybe the translation above is a bit different on W95 engl. version)
> >> >> 
> >> >> The problem is that WHFC do not pops-up printing more than 7 or 8 pages
> >> >> and seems to ignore the presence of "faxspool" file.
> >> >> 
> >> >> This client is very nice and can be a better choise than WinFlex.
> >> >> 
> >> >> 
> >> >> R.Sgarbi
> >> >> 
> >> >> 
> >> >> -------------------------
> >> >> Roberto Sgarbi
> >> >> Dip. Scienze Statistiche
> >> >> Univ. di Bologna - Italy
> >> >> -------------------------
> >> >> Did you ever tried the new Microsoft's Plug & *Pray* technology?
> >> >> 
> >> >> 
> >> >
> >> >
> >> 
> >> 
> >
> >
> 
> 




Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services