|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Transmit Phase B error???
- To: "FlexFax (Hylafax) Mailling list" <flexfax@sgi.com>
- Subject: Transmit Phase B error???
- From: Robert Niles <rniles@selah.net>
- Date: Thu, 19 Jun 1997 11:50:50 -0700
Sorry if this has been asked before, but I'm new to the list.
I don't know what the report means by Transmit Phase B error. IT does
this no matter which fax I'm calling, and does this on every call. I've
looked in the docs and in the faqs, but couldn't find any info on this
error.
Any suggestions?
Using hylafax-i386-linux-v4.0pl1-1, gs4.03, usr sportster 33600
Your facsimile job to 5760696 was not sent because:
Unspecified Transmit Phase B error
The job will be retried at 11:23.
---- Transcript of session follows ----
Jun 19 11:16:07.52: [ 364]: SESSION BEGIN 00000018 15095760696
Jun 19 11:16:07.52: [ 364]: SEND FAX: JOB 20 DEST 5760696 COMMID
00000018
Jun 19 11:16:07.53: [ 364]: DELAY 2600 ms
Jun 19 11:16:10.14: [ 364]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Jun 19 11:16:10.28: [ 364]: --> [2:OK]
Jun 19 11:16:10.28: [ 364]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Jun 19 11:16:10.42: [ 364]: --> [2:OK]
Jun 19 11:16:10.42: [ 364]: <-- [14:AT+FCLASS=2.0\r]
Jun 19 11:16:10.56: [ 364]: --> [2:OK]
Jun 19 11:16:10.56: [ 364]: <-- [9:AT+FLO=2\r]
Jun 19 11:16:10.70: [ 364]: --> [2:OK]
Jun 19 11:16:10.70: [ 364]: <-- [9:AT+FPP=0\r]
Jun 19 11:16:10.84: [ 364]: --> [2:OK]
Jun 19 11:16:10.84: [ 364]: <-- [9:AT+FBO=0\r]
Jun 19 11:16:10.98: [ 364]: --> [2:OK]
Jun 19 11:16:10.98: [ 364]: <-- [10:AT+FCT=30\r]
Jun 19 11:16:11.12: [ 364]: --> [2:OK]
Jun 19 11:16:11.12: [ 364]: <-- [15:AT+FNR=1,1,1,1\r]
Jun 19 11:16:11.26: [ 364]: --> [2:OK]
Jun 19 11:16:11.26: [ 364]: <-- [9:AT+FIE=0\r]
Jun 19 11:16:11.40: [ 364]: --> [2:OK]
Jun 19 11:16:11.40: [ 364]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jun 19 11:16:11.54: [ 364]: --> [2:OK]
Jun 19 11:16:11.54: [ 364]: <-- [5:ATM0\r]
Jun 19 11:16:11.68: [ 364]: --> [2:OK]
Jun 19 11:16:11.68: [ 364]: <-- [14:AT+FCLASS=2.0\r]
Jun 19 11:16:11.92: [ 364]: --> [2:OK]
Jun 19 11:16:11.92: [ 364]: <-- [9:AT+FLO=2\r]
Jun 19 11:16:12.16: [ 364]: --> [2:OK]
Jun 19 11:16:12.16: [ 364]: <-- [9:AT+FPP=0\r]
Jun 19 11:16:12.40: [ 364]: --> [2:OK]
Jun 19 11:16:12.40: [ 364]: <-- [9:AT+FBO=0\r]
Jun 19 11:16:12.64: [ 364]: --> [2:OK]
Jun 19 11:16:12.64: [ 364]: <-- [10:AT+FCT=30\r]
Jun 19 11:16:12.88: [ 364]: --> [2:OK]
Jun 19 11:16:12.88: [ 364]: <-- [15:AT+FNR=1,1,1,1\r]
Jun 19 11:16:13.12: [ 364]: --> [2:OK]
Jun 19 11:16:13.12: [ 364]: <-- [9:AT+FIE=0\r]
Jun 19 11:16:13.36: [ 364]: --> [2:OK]
Jun 19 11:16:13.36: [ 364]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jun 19 11:16:13.60: [ 364]: --> [2:OK]
Jun 19 11:16:13.60: [ 364]: <-- [30:AT+FLI="Racing Strollers Inc"\r]
Jun 19 11:16:13.84: [ 364]: --> [2:OK]
Jun 19 11:16:13.85: [ 364]: DIAL 5760696
Jun 19 11:16:13.85: [ 364]: <-- [12:ATDT5760696\r]
Jun 19 11:16:24.15: [ 364]: --> [4:+FCO]
Jun 19 11:16:27.17: [ 364]: --> [37:+FNF:+FCI:" 509 576
0696"+F]
Jun 19 11:16:27.17: [ 364]: REMOTE NSF "+FCI:" 509 576
0696"+F"
Jun 19 11:16:27.17: [ 364]: --> [15:ÿZª—ùÕ6V…–ß´Ä¡%]
Jun 19 11:16:27.64: [ 364]: --> [2:Yx]
Jun 19 11:16:27.64: [ 364]: --> [2:OK]
Jun 19 11:16:27.64: [ 364]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Jun 19 11:16:27.64: [ 364]: SEND FAILED: Unspecified Transmit Phase B
error
Jun 19 11:16:27.64: [ 364]: <-- [5:ATH0\r]
Jun 19 11:16:27.88: [ 364]: --> [2:OK]
Jun 19 11:16:27.88: [ 364]: SESSION END
