Re: Modem ZyXEL Elite 2864 ID

[Matthias.Apitz@SOFTCON.de]

Alexandre Meissonnier wrote:
    
    -----Original Message-----
    From:	Matthias.Apitz@softcon.de [SMTP:Matthias.Apitz@softcon.de]
    Sent:	Wednesday, June 18, 1997 4:50 PM
    To:	Alexandre Meissonnier
    Cc:	flexfax@sgi.com
    Subject:	Re: Modem ZyXEL Elite 2864 ID
    
    
    > BTW: I think I'll never understand why it's necesary to send
    > simple ASCII e-mail (all the chars in your log and the english
    > text are plain ASCII) in such a mime encoded form which makes
    > it very difficult to read, e.g. to check the AT-commands in
    > your log "AT&B1&N0&S0S18=3D4S38.3=3D1E0V1Q0S0=3DH" for problems.
        
    Sorry - I can't keep Microsoft mail from doing this.

     >    2) When I force HylaFAX to send via the new modem with "faxsend -m =
     >   tty2A" I get this result:=20
      
     >    Jun 18 13:16:01 idefix2 FaxSend[825]: DELAY 2600 ms
     >    Jun 18 13:16:04 idefix2 FaxSend[825]: <-- =
     >    [36:AT&B1&N0&S0S18=3D4S38.3=3D1E0V1Q0S0=3DH
     >    0\r]
    
    > in the above sequence there is something wrong with the setting
    > of the register S0 (or it's wrong encoded in the mail); I can't
    > see the value for S0 (should be S0=0);
    
    This is "AT&S0" if executed separately. This is a part of the ModemResetCmds
    explained in the config file I sent 2 emails ago.

not sure; for me every "=3D" stands for an "=" character in your
mail and the sequence AT&B1&N0&S0S18=3D4S38.3=3D1E0V1Q0S0=3DH"
reads AT&B1&N0&S0S18=4S38.3=1E0V1Q0S0=H (and S0=H is wrong);
please check the ASCII log file again for it;

    I would split the command this way:
    (AT) &B1
    	&N0
     	&S0
    	S18=4
    	S38.3=1
    	D1
    	E0
    	V1
    	Q0
    	S0=3
    	H0

if you set S0=3 this is also wrong for HylaFAX; the S0 must be
zero (the modem shouldn't pick up the call itself; faxgetty(1M)
does this with an ATA command); setting S0=3 will also perhaps
set the modem to not showing the RING message to faxgetty(1M);
    
    > if you can't get success you could send the device to me and
    > I'll check it out;
    
    Im Ernst?	

klar (yes, sure);

	matthias