Re: another failure due to Unspecified Transmit Phase B ?

[David Woolley <david@djwhome.demon.co.uk>]

The modem is returning corrupt versions of the end of line character.
I can't really explain this, except for a broken modem, as the other
likely cause, a cable fault, would not just affect the end of line.

Steve Wertz message, which arrived just after yours appears to be about
the same problem and suggests that there is a design flaw in the Sportsters.

Note that this is undeclared MIME quoted printable.

> May 28 07:04:12.73: [ 2125]: <-- [12:ATDT6653493\r]
> May 28 07:04:25.11: [ 2125]: --> [4:+FCO]
> May 28 07:04:27.75: [ 2125]: --> [14:+FNF:=1B+FCI:"  ]
                                            ^^^
 
> May 28 07:04:27.75: [ 2125]: REMOTE NSF "=1B+FCI:""
> May 28 07:04:27.75: [ 2125]: --> [32:       5056653493"=14+FIS:1,3,0,2,]
                                                         ^^^
> 
> May 28 07:04:27.75: [ 2125]: --> [48:,0,1,2C=B5=B7=E7=7Fs=DF=F7g=F9,hA=04=
                                             ^
> =0E=9Bad=CB=F8=E7=BA=F5=FDzi=06=08=14=A0=8B=81=09=12_=A5=BA=FF=DA=DE=FE=B6]

The remaining gibberish is the start of the fax scan line data.