Re: HylaFAX communication problem

[Matthias.Apitz@SOFTCON.de]

Ingo Ciechowski wrote:
    
    I've just completed a HylaFAX installation on my Linux 2.0.24 box with an
    USR courier I modem and now try to get my first fax send...
    
    Unfortuanetely there's some problem showing up which causes one of the
    involved fax modems (I beleive the one controlled by HylaFAX is first) to
    abort the connection process right after the called fax opened the line.
    
    I tried several destination fax modems/machines and always got the same
result.
    
    If someone knows why that "SEND FAILED" message is showing up in the log
    I'd really be glad to be told ;-)
    
    
    May 10 11:49:34.41: [ 8102]: SESSION BEGIN 00000011 496732333
    May 10 11:49:34.42: [ 8102]: SEND FAX: JOB 1 DEST 333 COMMID 00000011
    May 10 11:49:34.42: [ 8102]: DELAY 2600 ms
    May 10 11:49:37.02: [ 8102]: <-- [17:ATE0V1Q0X4S0=0H0\r]
    May 10 11:49:42.02: [ 8102]: MODEM <Timeout>

the 1st and main problem is this Timeout; the modem doesn't
respond within 5 secs to the initial AT commands and perhaps
doesn't see it ('cuze the echo mode isn't turned off as you
can see in all subsequent AT-echos); try figuring the reason
for this;

	matthias

    May 10 11:49:42.14: [ 8102]: <-- [5:ATM0\r]
    May 10 11:49:42.32: [ 8102]: --> [4:ATM0]
    May 10 11:49:42.32: [ 8102]: --> [2:OK]
    May 10 11:49:42.32: [ 8102]: <-- [14:AT+FCLASS=2.0\r]
    May 10 11:49:42.48: [ 8102]: --> [13:AT+FCLASS=2.0]
    May 10 11:49:42.48: [ 8102]: --> [2:OK]
    May 10 11:49:42.48: [ 8102]: <-- [9:AT+FLO=1\r]
    May 10 11:49:42.64: [ 8102]: --> [8:AT+FLO=1]
    May 10 11:49:42.64: [ 8102]: --> [2:OK]
    May 10 11:49:42.64: [ 8102]: <-- [9:AT+FPP=0\r]
    May 10 11:49:42.80: [ 8102]: --> [8:AT+FPP=0]
    May 10 11:49:42.80: [ 8102]: --> [2:OK]
    May 10 11:49:42.80: [ 8102]: <-- [9:AT+FBO=0\r]
    May 10 11:49:42.96: [ 8102]: --> [8:AT+FBO=0]
    May 10 11:49:42.96: [ 8102]: --> [2:OK]
    May 10 11:49:42.96: [ 8102]: <-- [10:AT+FCT=30\r]
    May 10 11:49:43.12: [ 8102]: --> [9:AT+FCT=30]
    May 10 11:49:43.12: [ 8102]: --> [2:OK]
    May 10 11:49:43.12: [ 8102]: <-- [15:AT+FNR=1,1,1,1\r]
    May 10 11:49:43.28: [ 8102]: --> [14:AT+FNR=1,1,1,1]
    May 10 11:49:43.28: [ 8102]: --> [2:OK]
    May 10 11:49:43.28: [ 8102]: <-- [9:AT+FIE=0\r]
    May 10 11:49:43.44: [ 8102]: --> [8:AT+FIE=0]
    May 10 11:49:43.44: [ 8102]: --> [2:OK]
    May 10 11:49:43.44: [ 8102]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
    May 10 11:49:43.60: [ 8102]: --> [22:AT+FCC=1,5,2,2,0,0,0,0]
    May 10 11:49:43.60: [ 8102]: --> [2:OK]
    May 10 11:49:43.60: [ 8102]: <-- [27:AT+FLI="CIS-Computer GmbH"\r]
    May 10 11:49:43.77: [ 8102]: --> [26:AT+FLI="CIS-Computer GmbH"]
    May 10 11:49:43.77: [ 8102]: --> [2:OK]
    May 10 11:49:43.77: [ 8102]: DIAL 333
    May 10 11:49:43.77: [ 8102]: <-- [8:ATDT333\r]
    May 10 11:49:57.96: [ 8102]: --> [7:ATDT333]
    May 10 11:49:57.96: [ 8102]: SEND FAILED: Unknown problem (check modem
power)
    May 10 11:49:57.96: [ 8102]: <-- [5:ATH0\r]
    May 10 11:49:57.96: [ 8102]: --> [4:+FCO]
    May 10 11:49:59.68: [ 8102]: --> [7:+FHS:02]
    May 10 11:49:59.68: [ 8102]: REMOTE HANGUP: Call aborted,  from +FK or
    <CAN> (code 2)
    May 10 11:49:59.68: [ 8102]: --> [2:OK]
    May 10 11:49:59.68: [ 8102]: SESSION END
    
    
    
    
    Ingo
    ciechowski@cis-computer.com
    
    --
    CCCC I SSSS Ingo Ciechowski            | phone   : +49.6732.9411-26
    C    I S    Ober-Saulheimer Strasse 18 | fax     : +49.6732.9411-333
    C    I  SSS D-55286  Woerrstadt        | business: CIS-Computer GmbH
    CCCC I Gmbh Germany                    | email   : info@cis-computer.com
     PGP-Key @ http://www.cis-computer.com/mitarbeiter/ciechowski/pgp.asc
    
    
    


-- 
firm: matthias.apitz@sisis.de [voc:+49-89-61308-351, fax: +49-89-61308-188]
priv: guru@thias.muc.de
 PGP: Key fingerprint = 0C 01 F2 23 EC 17 A2 D5  46 2D 29 4C 0E 8B 7E 8F

http://www.softcon.de/~guru/Bill-in-the-hell.html  -- Joke about Bill Gates.