|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
flow control Irix 5.3 on R4400
Hey flexfax:
I recently installed hylafax 4.0 on an Indy R4400 running Irix 5.3.
When I attempt rtscts with /dev/ttyf2 sendafax cannot initialize the
server; faxstat reports "initializing server" then shortly thereafter
reports "Waiting or modem to come available" and of course no fax is
transmitted.
When I attempt to use xonxoff with /dev/ttym2 sendafax does initialize
the server the modem dials and the receiving fax machine answers but
absolutely nothing is transmitted; faxstat eventually reports "Unknown
problem ( check modem power ).
The modem is a USrobotics sportster 56k faxmodem configured in class
2.0.
Anyone ?
Here is a Trace log from one of the xonxoff calls.
Apr 30 15:53:19.61: [27111]: SEND FAX: JOB 5 DEST XXX-XXXX COMMID
00000004
Apr 30 15:53:19.61: [27111]: DELAY 2600 ms
Apr 30 15:53:22.21: [27111]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 30 15:53:22.36: [27111]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 30 15:53:22.36: [27111]: --> [2:OK]
Apr 30 15:53:22.36: [27111]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
Apr 30 15:53:22.51: [27111]: --> [2:OK]
Apr 30 15:53:22.51: [27111]: <-- [14:AT+FCLASS=2.0\r]
Apr 30 15:53:22.65: [27111]: --> [2:OK]
Apr 30 15:53:22.65: [27111]: <-- [9:AT+FLO=1\r]
Apr 30 15:53:22.79: [27111]: --> [2:OK]
Apr 30 15:53:22.79: [27111]: <-- [9:AT+FPP=0\r]
Apr 30 15:53:22.93: [27111]: --> [2:OK]
Apr 30 15:53:22.93: [27111]: <-- [9:AT+FBO=0\r]
Apr 30 15:53:23.07: [27111]: --> [2:OK]
Apr 30 15:53:23.07: [27111]: <-- [10:AT+FCT=30\r]
Apr 30 15:53:23.22: [27111]: --> [2:OK]
Apr 30 15:53:23.22: [27111]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 30 15:53:23.37: [27111]: --> [2:OK]
Apr 30 15:53:23.37: [27111]: <-- [9:AT+FIE=0\r]
Apr 30 15:53:23.51: [27111]: --> [2:OK]
Apr 30 15:53:23.51: [27111]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 30 15:53:23.66: [27111]: --> [2:OK]
Apr 30 15:53:23.66: [27111]: <-- [5:ATM0\r]
Apr 30 15:53:23.80: [27111]: --> [2:OK]
Apr 30 15:53:23.81: [27111]: <-- [14:AT+FCLASS=2.0\r]
Apr 30 15:53:24.03: [27111]: --> [2:OK]
Apr 30 15:53:24.03: [27111]: <-- [9:AT+FLO=1\r]
Apr 30 15:53:24.25: [27111]: --> [2:OK]
Apr 30 15:53:24.25: [27111]: <-- [9:AT+FPP=0\r]
Apr 30 15:53:24.47: [27111]: --> [2:OK]
Apr 30 15:53:24.47: [27111]: <-- [9:AT+FBO=0\r]
Apr 30 15:53:24.69: [27111]: --> [2:OK]
Apr 30 15:53:24.69: [27111]: <-- [10:AT+FCT=30\r]
Apr 30 15:53:24.92: [27111]: --> [2:OK]
Apr 30 15:53:24.93: [27111]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 30 15:53:25.16: [27111]: --> [2:OK]
Apr 30 15:53:25.16: [27111]: <-- [9:AT+FIE=0\r]
Apr 30 15:53:25.38: [27111]: --> [2:OK]
Apr 30 15:53:25.38: [27111]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 30 15:53:25.61: [27111]: --> [2:OK]
Apr 30 15:53:25.61: [27111]: <-- [14:AT+FLI="NCCS"\r]
Apr 30 15:53:25.84: [27111]: --> [2:OK]
Apr 30 15:53:25.87: [27111]: DIAL 553-1180
Apr 30 15:53:25.87: [27111]: <-- [13:ATDTXXX-XXXX\r]
Apr 30 15:56:26.21: [27111]: SEND FAILED: Unknown problem (check modem
power)
Apr 30 15:56:26.21: [27111]: <-- [5:ATH0\r]
Apr 30 15:56:26.43: [27111]: --> [4:ATH0]
Apr 30 15:56:26.43: [27111]: --> [2:OK]
Apr 30 15:56:26.43: [27111]: SESSION END
