|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Still problems with 4.0 and Rackmount Zyxel..
Thanx to Matthias Apitz for the
hint with '@'. I took that our from the dialrules file,
and at least now the modem talks to the faxmachine.
The '@' seems to work fine on the standalone ZyXel though
(I have used that for years on a nother server..)
Also for the ATS7=120...
But now I constantly get unspecified transmit errors (code 20) in phase B..
Note: I also tried adding
Class2DDISCmd: AT+FDIS
but it didn't help..
It seems something to do with the encoding selection, but not being a fax-guru
I don' understand this..
Can anyone help??
here is the session log:
Apr 15 15:22:38.14: [17350]: SESSION BEGIN 00000020 654753273
Apr 15 15:22:38.14: [17350]: SEND FAX: JOB 10 DEST 4753273 COMMID 00000020
Apr 15 15:22:38.14: [17350]: DELAY 2600 ms
Apr 15 15:22:40.75: [17350]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Apr 15 15:22:40.97: [17350]: --> [2:OK]
Apr 15 15:22:40.97: [17350]: <-- [22:ATS8=2S7=120&H3&D2&C1\r]
Apr 15 15:22:40.99: [17350]: --> [2:OK]
Apr 15 15:22:40.99: [17350]: <-- [14:AT+FCLASS=2.0\r]
Apr 15 15:22:41.12: [17350]: --> [2:OK]
Apr 15 15:22:41.12: [17350]: <-- [9:AT+FLO=2\r]
Apr 15 15:22:41.13: [17350]: --> [2:OK]
Apr 15 15:22:41.13: [17350]: <-- [9:AT+FPP=0\r]
Apr 15 15:22:41.14: [17350]: --> [2:OK]
Apr 15 15:22:41.14: [17350]: <-- [9:AT+FBO=0\r]
Apr 15 15:22:41.15: [17350]: --> [2:OK]
Apr 15 15:22:41.15: [17350]: <-- [10:AT+FCT=30\r]
Apr 15 15:22:41.16: [17350]: --> [2:OK]
Apr 15 15:22:41.16: [17350]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 15 15:22:41.17: [17350]: --> [2:OK]
Apr 15 15:22:41.17: [17350]: <-- [9:AT+FIE=0\r]
Apr 15 15:22:41.18: [17350]: --> [2:OK]
Apr 15 15:22:41.18: [17350]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 15 15:22:41.20: [17350]: --> [2:OK]
Apr 15 15:22:41.20: [17350]: <-- [7:ATM1L5\r]
Apr 15 15:22:41.21: [17350]: --> [2:OK]
Apr 15 15:22:41.21: [17350]: <-- [14:AT+FCLASS=2.0\r]
Apr 15 15:22:41.44: [17350]: --> [2:OK]
Apr 15 15:22:41.44: [17350]: <-- [9:AT+FLO=2\r]
Apr 15 15:22:41.55: [17350]: --> [2:OK]
Apr 15 15:22:41.55: [17350]: <-- [9:AT+FPP=0\r]
Apr 15 15:22:41.66: [17350]: --> [2:OK]
Apr 15 15:22:41.66: [17350]: <-- [9:AT+FBO=0\r]
Apr 15 15:22:41.77: [17350]: --> [2:OK]
Apr 15 15:22:41.77: [17350]: <-- [10:AT+FCT=30\r]
Apr 15 15:22:41.88: [17350]: --> [2:OK]
Apr 15 15:22:41.88: [17350]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 15 15:22:41.99: [17350]: --> [2:OK]
Apr 15 15:22:41.99: [17350]: <-- [9:AT+FIE=0\r]
Apr 15 15:22:42.10: [17350]: --> [2:OK]
Apr 15 15:22:42.10: [17350]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 15 15:22:42.22: [17350]: --> [2:OK]
Apr 15 15:22:42.22: [17350]: <-- [17:AT+FLI="SingNet"\r]
Apr 15 15:22:42.34: [17350]: --> [2:OK]
Apr 15 15:22:42.35: [17350]: DIAL 4753273
Apr 15 15:22:42.35: [17350]: <-- [12:ATDT4753273\r]
Apr 15 15:22:58.79: [17350]: --> [4:+FCO]
Apr 15 15:22:58.79: [17350]: --> [18:+FNF:BC 53 01 60 ]
Apr 15 15:22:58.79: [17350]: REMOTE NSF "BC 53 01 60"
Apr 15 15:22:58.79: [17350]: --> [26:+FCI: ]
Apr 15 15:22:58.79: [17350]: REMOTE CSI ""
Apr 15 15:22:58.79: [17350]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 15 15:22:58.79: [17350]: --> [2:OK]
Apr 15 15:22:58.79: [17350]: REMOTE best rate 9600 bit/s
Apr 15 15:22:58.79: [17350]: REMOTE max page width 1728 pixels in 215 mm
Apr 15 15:22:58.79: [17350]: REMOTE max unlimited page length
Apr 15 15:22:58.79: [17350]: REMOTE best vres 7.7 line/mm
Apr 15 15:22:58.79: [17350]: REMOTE best format 2-D MR
Apr 15 15:22:58.79: [17350]: REMOTE best 0 ms/scanline
Apr 15 15:22:58.79: [17350]: USE 9600 bit/s
Apr 15 15:22:58.79: [17350]: USE 0 ms/scanline
Apr 15 15:22:58.79: [17350]: SEND file "docq/doc10.cover;30"
Apr 15 15:22:58.79: [17350]: USE page width 1728 pixels in 215 mm
Apr 15 15:22:58.79: [17350]: USE unlimited page length
Apr 15 15:22:58.79: [17350]: USE 3.85 line/mm
Apr 15 15:22:58.79: [17350]: USE 1-D MR
Apr 15 15:22:58.79: [17350]: <-- [23:AT+FIS=0,3,0,2,0,0,0,0\r]
Apr 15 15:23:05.96: [17350]: --> [7:+FHS:20]
Apr 15 15:23:05.96: [17350]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Apr 15 15:23:05.96: [17350]: --> [2:OK]
Apr 15 15:23:05.96: [17350]: <-- [7:AT+FDT\r]
Apr 15 15:23:06.36: [17350]: --> [10:NO CARRIER]
Apr 15 15:23:06.36: [17350]: MODEM No carrier
Apr 15 15:23:06.36: [17350]: SEND: Unspecified Transmit Phase B error; Giving up after 3 attempts to send same page "docq/doc10.cover;30", dir
num 0
Apr 15 15:23:06.36: [17350]: <-- [5:ATH0\r]
Apr 15 15:23:06.67: [17350]: --> [2:OK]
Apr 15 15:23:06.67: [17350]: SESSION END
and here the config file:
CountryCode: 65
AreaCode: ""
FAXNumber: +65.4767112
LongDistancePrefix: 02
InternationalPrefix: 001
DialStringRules: "etc/dialrules"
ServerTracing: 11
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: medium
GettyArgs: "-h %l dx_%s"
LocalIdentifier: SingNet
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
NoCarrierRetrys: 3
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2.0 # use class 2.0 interface
ModemRate: 38400 # 38.4 works fine
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&H0 # disable flow control
ModemHardFlowCmd: AT&H3 # hardware flow control
ModemSoftFlowCmd: AT&H4 # software flow control
ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up
ModemSetupDCDCmd: AT&C1 # DCD tracks carrier
#
ModemSetupAACmd: AT+FAA=1 # enable in current class
#
# Additional reset commands:
#
# &B1 DTE-DCE rate is fixed at DTE setting
# &N0 Auto-negotiate highest possible DCE-DCE link rate
# &S0 DSR always on
# *F0 Deny remote configuration
# S18=2 Receive at 38400
# S38.3=1 DCD on/off sequence follows UNIX standard; also
# fix receiving baud rate at S18 value
# S39=0 (avoid Class 2 compatibility hacks)
#
ModemResetCmds: AT&B1&N0&S0*F0S18=2S38.3=1S39=0
#
ModemWaitTimeCmd: ATS7=120
ModemDialCmd: ATDT%s # no '@' 'cuz then busy not recognized
NoCarrierRetrys: 3 # retry 3 times on no carrier
#
ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#
# Caller ID configuration setup.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "CALLER NUMBER: " # pattern string for phone number info
#CIDName: "CALLER NAME: " # pattern string for identity info
#
PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet)
#
# Rev 6.1x firmware have a bug in the ECM support so
# explicitly disable it's use. To re-enable its use just
# comment out the following line.
#
Class2DCCQueryCmd: "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),(0-7)"
#Class2DDISCmd: AT+FDIS
This is under Hylafax 4.0pl1, on Linux 2.0.29 with a Zyxel Rackmounted Modem
AT+FMDL?, AT+FREV? and AT+FMFR? all return:
U1496R+ V 6.14
Any help is appreciated..
Mathias Koerber | Tel: +65 / 471 9820 | mathias@staff.singnet.com.sg
SingNet NOC | Fax: +65 / 475 3273 | mathias@koerber.org
Q'town Tel. Exch. | PGP: Keyid: 768/25E082BD, finger mathias@singnet.com.sg
2 Stirling Rd | 1A 8B FC D4 93 F1 9A FC BD 98 A3 1A 0E 73 01 65
S'pore 148943 | Disclaimer: I speak only for myself
* Eifersucht ist eine Leidenschaft, die mit Eifer sucht, was Leiden schafft *
