|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Modem timeout after some days with Hylafax 4.0pl1
Hi everybody,
After some days, my modem (USR-Robotics Courier Dual Standard) is no more able
to send fax with Hylafax 4.0pl1 and power off/on is enough to solve the
problem.
The error message is :
MODEM <Timeout> after ATH0 (see below) :
Apr 05 03:56:35.82: [23852]: DELAY 2600 ms
Apr 05 03:56:38.42: [23852]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 05 03:56:38.59: [23852]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 05 03:56:38.59: [23852]: --> [2:OK]
Apr 05 03:56:38.59: [23852]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
Apr 05 03:56:38.76: [23852]: --> [2:OK]
Apr 05 03:56:38.76: [23852]: <-- [14:AT+FCLASS=2.0\r]
Apr 05 03:56:38.80: [23852]: --> [2:OK]
Apr 05 03:56:38.80: [23852]: <-- [9:AT+FLO=1\r]
Apr 05 03:56:38.84: [23852]: --> [2:OK]
Apr 05 03:56:38.84: [23852]: <-- [9:AT+FPP=0\r]
Apr 05 03:56:38.88: [23852]: --> [2:OK]
Apr 05 03:56:38.88: [23852]: <-- [9:AT+FBO=0\r]
Apr 05 03:56:38.92: [23852]: --> [2:OK]
Apr 05 03:56:38.92: [23852]: <-- [10:AT+FCT=30\r]
Apr 05 03:56:38.96: [23852]: --> [2:OK]
Apr 05 03:56:38.96: [23852]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 05 03:56:39.00: [23852]: --> [2:OK]
Apr 05 03:56:39.00: [23852]: <-- [9:AT+FIE=0\r]
Apr 05 03:56:39.04: [23852]: --> [2:OK]
Apr 05 03:56:Apr 05 03:56:39.09: [23852]: --> [2:OK]
Apr 05 03:56:39.09: [23852]: <-- [5:ATM0\r]
Apr 05 03:56:39.25: [23852]: --> [2:OK]
Apr 05 03:56:39.32: [23852]: <-- [14:AT+FCLASS=2.0\r]
Apr 05 03:56:39.45: [23852]: --> [2:OK]
Apr 05 03:56:39.45: [23852]: <-- [9:AT+FLO=1\r]
Apr 05 03:56:39.59: [23852]: --> [2:OK]
Apr 05 03:56:39.59: [23852]: <-- [9:AT+FPP=0\r]
Apr 05 03:56:39.73: [23852]: --> [2:OK]
Apr 05 03:56:39.73: [23852]: <-- [9:AT+FBO=0\r]
Apr 05 03:56:39.87: [23852]: --> [2:OK]
Apr 05 03:56:39.87: [23852]: <-- [10:AT+FCT=30\r]
Apr 05 03:56:40.01: [23852]: --> [2:OK]
Apr 05 03:56:40.01: [23852]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 05 03:56:40.15: [23852]: --> [2:OK]
Apr 05 03:56:40.15: [23852]: <-- [9:AT+FIE=0\r]
Apr 05 03:56:40.29: [23852]: --> [2:OK]
Apr 05 03:56:40.29: [23852]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 05 03:56:40.43: [23852]: --> [2:OK]
Apr 05 03:56:40.43: [23852]: <-- [22:AT+FLI="NothingSetup"\r]
Apr 05 03:56:40.57: [23852]: --> [2:OK]
Apr 05 03:56:40.58: [23852]: DIAL phone-number#
Apr 05 03:56:40.58: [23852]: <-- [35:ATDTphone-number#\r]
Apr 05 03:56:40.86: [23852]: --> [5:ERROR]
Apr 05 03:56:40.86: [23852]: SEND FAILED: Invalid dialing command
Apr 05 03:56:40.87: [23852]: SEND FAILED: Invalid dialing command; too many
attempts to dial
Apr 05 03:56:40.87: [23852]: <-- [5:ATH0\r]
Apr 05 03:56:45.86: [23852]: MODEM <Timeout>
Apr 05 03:56:45.88: [23852]: SESSION END
Any idea about that problem ?
--
Gildas PERROT, perrot@francenet.fr __o
FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_
http://www.francenet.fr ---- (_)/ (_)
--
Gildas PERROT, perrot@francenet.fr __o
FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_
http://www.francenet.fr ---- (_)/ (_)
