Re: HELP: can send but cannot receive (retrain negative)

[Matthias.Apitz@SOFTCON.de]

Kadlecsik Jozsi wrote:
    
    Hello,
    
    Here is the configuration:
    
    HylaFAX v4.0pl1 on Linux (Slackware 3.1.0, kernel 2.0.27) compiled 
    by gcc 2.7.2 and a Smart One 2834 internal faxmodem (V1.510-V34_DP).
    
    There is no problem with sending faxes, but we were so far *unable* to receive
    any fax. Even when quality checking is disabled, HylaFAX sends back
    retrain negative messages to the sender.

HylaFAX doesn't send back the retrain negative message - the
modem does it. From the point of view of the modem the page
is bad and it shows this to HylaFAX with the code "+FPTS: 2,2219,0,0";

try figuring out the reason for that; did you really disable the
quality checking in the modem?
    
    I have read the answer to the question 82 in the FAQ but - unfortunately -
    I don't understand it.

this question and answer is unrelated to this problem;

	matthias
    
    
    One of the sessions:
    Feb 26 14:41:39.30: [  207]: SESSION BEGIN 00000016 3613959221
    Feb 26 14:41:39.30: [  207]: <-- [4:ATA\r]
    Feb 26 14:41:47.82: [  207]: --> [5:+FCON]
    Feb 26 14:41:47.84: [  207]: ANSWER: FAX CONNECTION
    Feb 26 14:41:47.84: [  207]: RECV FAX: begin
    Feb 26 14:41:49.51: [  207]: --> [29:+FTSI: "       +36 1 3959151"]
    Feb 26 14:41:49.51: [  207]: REMOTE TSI "+36 1 3959151"
    Feb 26 14:41:49.92: [  207]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
    Feb 26 14:41:49.92: [  207]: REMOTE wants 9600 bit/s
    Feb 26 14:41:49.92: [  207]: REMOTE wants page width 1728 pixels in 215 mm
    Feb 26 14:41:49.92: [  207]: REMOTE wants unlimited page length 
    Feb 26 14:41:49.92: [  207]: REMOTE wants 3.85 line/mm
    Feb 26 14:41:49.92: [  207]: REMOTE wants 2-D MR
    Feb 26 14:41:49.92: [  207]: --> [2:OK]
    Feb 26 14:41:49.92: [  207]: <-- [7:AT+FDR\r]
    Feb 26 14:41:51.54: [  207]: --> [5:+FCFR]
    Feb 26 14:41:53.95: [  207]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
    Feb 26 14:41:53.95: [  207]: REMOTE wants 9600 bit/s
    Feb 26 14:41:53.95: [  207]: REMOTE wants page width 1728 pixels in 215 mm
    Feb 26 14:41:53.95: [  207]: REMOTE wants unlimited page length 
    Feb 26 14:41:53.95: [  207]: REMOTE wants 3.85 line/mm
    Feb 26 14:41:53.95: [  207]: REMOTE wants 2-D MR
    Feb 26 14:41:53.95: [  207]: --> [7:CONNECT]
    Feb 26 14:41:53.95: [  207]: RECV: begin page
    Feb 26 14:41:53.95: [  207]: RECV: send trigger 021
    Feb 26 14:42:21.10: [  207]: RECV: 1511 bytes of data, 48 total lines
    Feb 26 14:42:21.10: [  207]: --> [17:+FPTS: 2,2219,0,0]
                                          ^^^^^^^^^^^^^^^^
    Feb 26 14:42:25.32: [  207]: --> [7:+FET: 2]
    Feb 26 14:42:25.32: [  207]: RECV recv EOP (no more pages or documents)
    Feb 26 14:42:25.32: [  207]: --> [2:OK]
    Feb 26 14:42:25.32: [  207]: RECV send RTN (retrain negative)
    Feb 26 14:42:25.32: [  207]: <-- [7:AT+FDR\r]
    Feb 26 14:42:29.23: [  207]: --> [29:+FTSI: "       +36 1 3959151"]