Page size, Windows 95/NT & WHFC

To: flexfax@sgi.com
Subject: Page size, Windows 95/NT & WHFC
From: Johannes Joubert <johannes@karoo3.agric.za>
Date: Mon, 24 Feb 1997 15:45:46 +0200 (SAT)

Hello

Here follows a trace for an Windows NT machine using a QMS-PS 820 driver
with:
Print Processor NT EMF 1.003 
Page Size A4
Available Postscript Memory 392 KB

I used Corel Wordperfect 6.1 for Windows to print the fax with:
Page Size A4
Print Quality High

I used the Whfc 0.3A client on Windows NT 4.0 with:
Page Size A4
Fine Print

The cover page have gone through but the actaul fax did not go through.

I think that the revelant info is:
Feb 24 14:52:32.92: [ 2036]: REMOTE max page width 1728 pixels in 215 mm
Feb 24 14:52:32.92: [ 2036]: REMOTE max unlimited page length 
Feb 24 14:52:32.92: [ 2036]: REMOTE best vres 7.7 line/mm

Feb 24 14:52:32.92: [ 2036]: SEND file "docq/doc78.cover;71"
Feb 24 14:52:32.92: [ 2036]: USE page width 1728 pixels in 215 mm
Feb 24 14:52:32.92: [ 2036]: USE unlimited page length 
Feb 24 14:52:32.92: [ 2036]: USE 7.7 line/mm

Feb 24 14:52:57.11: [ 2036]: SEND file "docq/doc144.ps;71"
Feb 24 14:52:57.12: [ 2036]: Modem does not support document page width, 
                             max page width 2432 pixels, 
                             image width 1686 pixels


If I change the page size from A4 to Letter the faxes seem to go through
90 % of the time. What should I do to resolve this problem?


Here is the trace:

Feb 24 14:52:12.11: [ 2036]: SESSION BEGIN 00000235 **********
Feb 24 14:52:12.12: [ 2036]: SEND FAX: JOB 78 DEST ***** COMMID 00000235
Feb 24 14:52:12.12: [ 2036]: DELAY 2600 ms
Feb 24 14:52:14.72: [ 2036]: <-- [15:ATE0V1X4S0=0H0\r]
Feb 24 14:52:14.73: [ 2036]: --> [2:OK]
Feb 24 14:52:14.73: [ 2036]: <-- [21:ATS8=2S7=60\Q1&D2&C1\r]
Feb 24 14:52:14.75: [ 2036]: --> [2:OK]
Feb 24 14:52:14.75: [ 2036]: <-- [12:AT+FCLASS=1\r]
Feb 24 14:52:14.76: [ 2036]: --> [2:OK]
Feb 24 14:52:14.76: [ 2036]: <-- [5:ATM0\r]
Feb 24 14:52:14.77: [ 2036]: --> [2:OK]
Feb 24 14:52:14.77: [ 2036]: <-- [12:AT+FCLASS=1\r]
Feb 24 14:52:14.88: [ 2036]: --> [2:OK]
Feb 24 14:52:14.88: [ 2036]: DIAL ******
Feb 24 14:52:14.88: [ 2036]: <-- [11:ATD******@\r]
Feb 24 14:52:30.65: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:31.45: [ 2036]: --> [2:OK]
Feb 24 14:52:31.45: [ 2036]: <-- [9:AT+FRH=3\r]
Feb 24 14:52:31.46: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:31.94: [ 2036]: --> [2:OK]
Feb 24 14:52:31.94: [ 2036]: <-- [9:AT+FRH=3\r]
Feb 24 14:52:31.95: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:32.64: [ 2036]: --> [2:OK]
Feb 24 14:52:32.64: [ 2036]: REMOTE CSI "*********"
Feb 24 14:52:32.64: [ 2036]: <-- [9:AT+FRH=3\r]
Feb 24 14:52:32.65: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:32.92: [ 2036]: --> [2:OK]
Feb 24 14:52:32.92: [ 2036]: REMOTE best rate 9600 bit/s
Feb 24 14:52:32.92: [ 2036]: REMOTE max page width 1728 pixels in 215 mm
Feb 24 14:52:32.92: [ 2036]: REMOTE max unlimited page length 
Feb 24 14:52:32.92: [ 2036]: REMOTE best vres 7.7 line/mm
Feb 24 14:52:32.92: [ 2036]: REMOTE best format 2-D MR
Feb 24 14:52:32.92: [ 2036]: REMOTE supports T.30 Annex A, ECM
Feb 24 14:52:32.92: [ 2036]: REMOTE best 10 ms/scanline
Feb 24 14:52:32.92: [ 2036]: USE 9600 bit/s
Feb 24 14:52:32.92: [ 2036]: USE 10 ms/scanline
Feb 24 14:52:32.92: [ 2036]: SEND file "docq/doc78.cover;71"
Feb 24 14:52:32.92: [ 2036]: USE page width 1728 pixels in 215 mm
Feb 24 14:52:32.92: [ 2036]: USE unlimited page length 
Feb 24 14:52:32.92: [ 2036]: USE 7.7 line/mm
Feb 24 14:52:32.92: [ 2036]: USE 2-D MR
Feb 24 14:52:32.92: [ 2036]: SEND training at v.29 9600 bit/s
Feb 24 14:52:32.92: [ 2036]: <-- [9:AT+FTH=3\r]
Feb 24 14:52:33.75: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:33.75: [ 2036]: <-- data [23]
Feb 24 14:52:33.75: [ 2036]: <-- data [2]
Feb 24 14:52:34.69: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:34.69: [ 2036]: <-- data [6]
Feb 24 14:52:34.69: [ 2036]: <-- data [2]
Feb 24 14:52:35.37: [ 2036]: --> [2:OK]
Feb 24 14:52:35.37: [ 2036]: DELAY 75 ms
Feb 24 14:52:35.46: [ 2036]: <-- [10:AT+FTM=96\r]
Feb 24 14:52:35.47: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:35.47: [ 2036]: <-- data [1024]
Feb 24 14:52:35.47: [ 2036]: <-- data [776]
Feb 24 14:52:35.47: [ 2036]: <-- data [2]
Feb 24 14:52:37.50: [ 2036]: --> [2:OK]
Feb 24 14:52:37.50: [ 2036]: <-- [9:AT+FRH=3\r]
Feb 24 14:52:37.78: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:38.86: [ 2036]: --> [2:OK]
Feb 24 14:52:38.86: [ 2036]: TRAINING succeeded
Feb 24 14:52:38.86: [ 2036]: <-- [10:AT+FTM=96\r]
Feb 24 14:52:38.87: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:38.87: [ 2036]: SEND begin page
Feb 24 14:52:38.88: [ 2036]: <-- data [1027]
Feb 24 14:52:38.89: [ 2036]: <-- data [1031]
Feb 24 14:52:38.89: [ 2036]: <-- data [1031]
Feb 24 14:52:38.89: [ 2036]: <-- data [1029]
Feb 24 14:52:40.71: [ 2036]: <-- data [1028]
Feb 24 14:52:40.71: [ 2036]: <-- data [1027]
Feb 24 14:52:42.63: [ 2036]: <-- data [1027]
Feb 24 14:52:42.63: [ 2036]: <-- data [1027]
Feb 24 14:52:42.63: [ 2036]: <-- data [1028]
Feb 24 14:52:44.52: [ 2036]: <-- data [1026]
Feb 24 14:52:44.52: [ 2036]: <-- data [1026]
Feb 24 14:52:46.40: [ 2036]: <-- data [1028]
Feb 24 14:52:46.40: [ 2036]: <-- data [1027]
Feb 24 14:52:48.29: [ 2036]: <-- data [1026]
Feb 24 14:52:48.29: [ 2036]: <-- data [1027]
Feb 24 14:52:50.18: [ 2036]: <-- data [1026]
Feb 24 14:52:50.18: [ 2036]: <-- data [1025]
Feb 24 14:52:52.07: [ 2036]: <-- data [359]
Feb 24 14:52:52.07: [ 2036]: SENT 17765 bytes of data
Feb 24 14:52:52.07: [ 2036]: SEND 2D RTC
Feb 24 14:52:52.07: [ 2036]: <-- data [30]
Feb 24 14:52:52.07: [ 2036]: <-- data [2]
Feb 24 14:52:52.07: [ 2036]: SEND end page
Feb 24 14:52:54.24: [ 2036]: --> [2:OK]
Feb 24 14:52:54.24: [ 2036]: DELAY 75 ms
Feb 24 14:52:54.33: [ 2036]: SEND send MPS (more pages, same document)
Feb 24 14:52:54.33: [ 2036]: <-- [9:AT+FTH=3\r]
Feb 24 14:52:55.15: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:55.15: [ 2036]: <-- data [3]
Feb 24 14:52:55.15: [ 2036]: <-- data [2]
Feb 24 14:52:55.75: [ 2036]: --> [2:OK]
Feb 24 14:52:55.75: [ 2036]: <-- [9:AT+FRH=3\r]
Feb 24 14:52:56.04: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:57.11: [ 2036]: --> [2:OK]
Feb 24 14:52:57.11: [ 2036]: SEND recv MCF (message confirmation)
Feb 24 14:52:57.11: [ 2036]: SEND FAX (00000235): FROM ****** TO ***** (page 3 of 4 sent in 0:25)
Feb 24 14:52:57.11: [ 2036]: SEND FAX (00000235): FROM ****** TO ***** (docq/doc78.cover;71 sent in 0:25)
Feb 24 14:52:57.11: [ 2036]: SEND file "docq/doc144.ps;71"
Feb 24 14:52:57.12: [ 2036]: Modem does not support document page width, max page width 2432 pixels, image width 1686 pixels
Feb 24 14:52:57.12: [ 2036]: <-- [9:AT+FTH=3\r]
Feb 24 14:52:57.95: [ 2036]: --> [7:CONNECT]
Feb 24 14:52:57.95: [ 2036]: <-- data [3]
Feb 24 14:52:57.95: [ 2036]: <-- data [2]
Feb 24 14:52:58.55: [ 2036]: --> [2:OK]
Feb 24 14:52:58.55: [ 2036]: <-- [5:ATH0\r]
Feb 24 14:52:59.41: [ 2036]: --> [2:OK]
Feb 24 14:52:59.41: [ 2036]: SESSION END
 


Thank's

Johannes Joubert

Prev by Date: a small and ugly patch to have latex-cover coverpages work with MacFLEX
Next by Date: RE: Problems with Winflex
Prev by thread: a small and ugly patch to have latex-cover coverpages work with MacFLEX
Next by thread: Re: no comments and no regarding on my cover
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services