Hylafax Mailing List Archives
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Garbage in log file


Hi all

My system: HylaFAX Version 3.0p10113
           indy - IRIX 5.3
           boca modem MV.34EM (14,400)   

Generally I have no problem running hylafax (outbound only).
But when I try to send faxes to some fax numbers I got strange errors.
For example here is a log file that seems to be OK at the beggining 
but suddenly contain garbage and then give a DTE to DCE data underflow (code 43)
error.

Any idea why and what can I do in order to fix it ?


==============================================================================
Feb 13 19:29:51.27: [ 8384]: SESSION BEGIN
Feb 13 19:29:51.28: [ 8384]: DELAY 2600 ms
Feb 13 19:29:53.87: [ 8384]: <-- [14:ATE0V1Q0S0=0H0]
Feb 13 19:29:54.13: [ 8384]: --> [2:OK]
Feb 13 19:29:54.13: [ 8384]: <-- [20:ATS8=2S7=60&K4&D3&C1]
Feb 13 19:29:54.39: [ 8384]: --> [2:OK]
Feb 13 19:29:54.39: [ 8384]: <-- [11:AT+FCLASS=2]
Feb 13 19:29:54.65: [ 8384]: --> [2:OK]
Feb 13 19:29:54.65: [ 8384]: <-- [9:AT+FTBC=0]
Feb 13 19:29:54.91: [ 8384]: --> [2:OK]
Feb 13 19:29:54.91: [ 8384]: <-- [9:AT+FBOR=0]
Feb 13 19:29:55.17: [ 8384]: --> [2:OK]
Feb 13 19:29:55.17: [ 8384]: <-- [13:AT+FPHCTO=600]
Feb 13 19:29:55.43: [ 8384]: --> [2:OK]
Feb 13 19:29:55.43: [ 8384]: <-- [23:AT+FDCC=1,5,2,2,1,0,0,0]
Feb 13 19:29:55.69: [ 8384]: --> [2:OK]
Feb 13 19:29:55.69: [ 8384]: <-- [4:ATM0]
Feb 13 19:29:55.94: [ 8384]: --> [2:OK]
Feb 13 19:29:55.94: [ 8384]: <-- [11:AT+FCLASS=2]
Feb 13 19:29:56.20: [ 8384]: --> [2:OK]
Feb 13 19:29:56.20: [ 8384]: <-- [9:AT+FTBC=0]
Feb 13 19:29:56.46: [ 8384]: --> [2:OK]
Feb 13 19:29:56.46: [ 8384]: <-- [9:AT+FBOR=0]
Feb 13 19:29:56.71: [ 8384]: --> [2:OK]
Feb 13 19:29:56.71: [ 8384]: <-- [13:AT+FPHCTO=600]
Feb 13 19:29:56.97: [ 8384]: --> [2:OK]
Feb 13 19:29:56.97: [ 8384]: <-- [23:AT+FDCC=1,5,2,2,1,0,0,0]
Feb 13 19:29:57.23: [ 8384]: --> [2:OK]
Feb 13 19:29:57.23: [ 8384]: <-- [20:AT+FLID="+036190992"]
Feb 13 19:29:57.49: [ 8384]: --> [2:OK]
Feb 13 19:29:57.49: [ 8384]: DIAL 7533362
Feb 13 19:29:57.49: [ 8384]: <-- [11:ATDT7533362]
Feb 13 19:30:11.73: [ 8384]: --> [5:+FCON]
Feb 13 19:30:13.94: [ 8384]: --> [29:+FCSI: "       972 3 7533362"]
Feb 13 19:30:13.95: [ 8384]: REMOTE CSI "972 3 7533362"
Feb 13 19:30:14.26: [ 8384]: --> [22:+FDIS: 1,5,0,2,1,0,0,4]
Feb 13 19:30:14.37: [ 8384]: --> [2:OK]
Feb 13 19:30:14.38: [ 8384]: REMOTE best rate 14400 bit/s
Feb 13 19:30:14.38: [ 8384]: REMOTE max page width 1728 pixels in 215 mm
Feb 13 19:30:14.38: [ 8384]: REMOTE max unlimited page length 
Feb 13 19:30:14.38: [ 8384]: REMOTE best vres 7.7 line/mm
Feb 13 19:30:14.38: [ 8384]: REMOTE best format 2-D MR
Feb 13 19:30:14.38: [ 8384]: REMOTE best 20 ms, 10 ms/scanline
Feb 13 19:30:14.38: [ 8384]: REMOTE does not support PostScript transfer
Feb 13 19:30:14.38: [ 8384]: USE 14400 bit/s
Feb 13 19:30:14.38: [ 8384]: USE 20 ms, 10 ms/scanline
Feb 13 19:30:14.38: [ 8384]: SEND file "docq/doc29266;30"
Feb 13 19:30:14.39: [ 8384]: USE page width 1728 pixels in 215 mm
Feb 13 19:30:14.39: [ 8384]: USE unlimited page length 
Feb 13 19:30:14.39: [ 8384]: USE 3.85 line/mm
Feb 13 19:30:14.39: [ 8384]: USE 1-D MR
Feb 13 19:30:14.39: [ 8384]: <-- [23:AT+FDIS=0,5,0,2,0,0,0,4]
Feb 13 19:30:14.64: [ 8384]: --> [2:OK]
Feb 13 19:30:14.65: [ 8384]: <-- [6:AT+FDT]
Feb 13 19:30:22.84: [ 8384]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
Feb 13 19:30:23.05: [ 8384]: --> [7:CONNECT]
Feb 13 19:30:23.12: [ 8384]: SEND wait for XON
Feb 13 19:30:23.12: [ 8384]: --> [1:]
Feb 13 19:30:23.12: [ 8384]: SEND begin page
Feb 13 19:30:23.13: [ 8384]: <-- data [1028]

< Stuff deleted >



Feb 13 19:30:42.28: [ 8384]: <-- data [537]
Feb 13 19:30:43.59: [ 8384]: SENT 19993 bytes of data
Feb 13 19:30:43.60: [ 8384]: <-- data [2]
Feb 13 19:30:47.91: [ 8384]: SEND end page
Feb 13 19:30:49.29: [ 8384]: --> [2:OK]
Feb 13 19:30:49.29: [ 8384]: SEND send MPS (more pages, same document)
Feb 13 19:30:49.29: [ 8384]: <-- [8:AT+FET=0]
Feb 13 19:30:52.72: [ 8384]: --> [8:+FPTS: 1]
Feb 13 19:30:52.83: [ 8384]: --> [2:OK]
Feb 13 19:30:52.83: [ 8384]: SEND recv MCF (message confirmation)
Feb 13 19:30:52.84: [ 8384]: SEND FAX: FROM kerry@snoopy TO +037533362 (docq/doc29266;30 sent in 1:01)
Feb 13 19:30:52.90: [ 8384]: SEND file "docq/doc29267;30"
Feb 13 19:30:52.90: [ 8384]: USE page width 1728 pixels in 215 mm
Feb 13 19:30:52.90: [ 8384]: USE unlimited page length 
Feb 13 19:30:52.90: [ 8384]: USE 3.85 line/mm
Feb 13 19:30:52.90: [ 8384]: USE 1-D MR
Feb 13 19:30:52.90: [ 8384]: <-- [6:AT+FDT]
Feb 13 19:30:54.09: [ 8384]: --> [7:CONNECT]
Feb 13 19:30:54.09: [ 8384]: SEND wait for XON
Feb 13 19:30:54.09: [ 8384]: --> [1:]
Feb 13 19:30:54.10: [ 8384]: SEND begin page
Feb 13 19:30:54.10: [ 8384]: <-- data [1030]
< Stuff deleted >

Feb 13 19:31:13.41: [ 8384]: <-- data [898]
Feb 13 19:31:14.57: [ 8384]: SENT 25473 bytes of data
Feb 13 19:31:14.57: [ 8384]: <-- data [2]
Feb 13 19:31:18.29: [ 8384]: SEND end page
Feb 13 19:31:22.34: [ 8384]: --> [2:OK]
Feb 13 19:31:22.34: [ 8384]: SEND send MPS (more pages, same document)
Feb 13 19:31:22.34: [ 8384]: <-- [8:AT+FET=0]
Feb 13 19:31:25.71: [ 8384]: --> [8:+FPTS: 1]
Feb 13 19:31:25.82: [ 8384]: --> [2:OK]
Feb 13 19:31:25.82: [ 8384]: SEND recv MCF (message confirmation)
Feb 13 19:31:25.82: [ 8384]: SEND FAX: FROM kerry@snoopy TO +037533362 (docq/doc29267;30 sent in 0:33)
Feb 13 19:31:25.88: [ 8384]: SEND file "docq/doc29268;30"
Feb 13 19:31:25.88: [ 8384]: USE page width 1728 pixels in 215 mm
Feb 13 19:31:25.88: [ 8384]: USE unlimited page length 
Feb 13 19:31:25.88: [ 8384]: USE 3.85 line/mm
Feb 13 19:31:25.88: [ 8384]: USE 1-D MR
Feb 13 19:31:25.88: [ 8384]: <-- [6:AT+FDT]
Feb 13 19:31:27.07: [ 8384]: --> [7:CONNECT]
Feb 13 19:31:27.07: [ 8384]: SEND wait for XON
Feb 13 19:31:27.07: [ 8384]: --> [1:]
Feb 13 19:31:27.07: [ 8384]: SEND begin page
Feb 13 19:31:40.86: [ 8384]: <-- data [1029]

< Stuff deleted >

Feb 13 19:31:42.95: [ 8384]: <-- data [95]
Feb 13 19:31:43.44: [ 8384]: SENT 19551 bytes of data
Feb 13 19:31:43.44: [ 8384]: <-- data [2]
Feb 13 19:31:46.53: [ 8384]: SEND end page
Feb 13 19:31:54.48: [ 8384]: --> [2:OK]
Feb 13 19:31:54.49: [ 8384]: SEND send EOM (more documents)
Feb 13 19:31:54.49: [ 8384]: <-- [8:AT+FET=1]
Feb 13 19:31:57.94: [ 8384]: --> [8:+FPTS: 1]
Feb 13 19:31:58.06: [ 8384]: --> [2:OK]
Feb 13 19:31:58.06: [ 8384]: SEND recv MCF (message confirmation)
Feb 13 19:31:58.06: [ 8384]: SEND FAX: FROM kerry@snoopy TO +037533362 (docq/doc29268;30 sent in 0:33)
Feb 13 19:31:58.12: [ 8384]: SEND file "docq/doc29269.6735"
Feb 13 19:31:58.12: [ 8384]: USE page width 1728 pixels in 215 mm
Feb 13 19:31:58.12: [ 8384]: USE unlimited page length 
Feb 13 19:31:58.12: [ 8384]: USE 7.7 line/mm
Feb 13 19:31:58.12: [ 8384]: USE 1-D MR
Feb 13 19:31:58.12: [ 8384]: <-- [23:AT+FDIS=1,5,0,2,0,0,0,4]
Feb 13 19:31:58.38: [ 8384]: --> [2:OK]
Feb 13 19:31:58.38: [ 8384]: <-- [6:AT+FDT]
Feb 13 19:32:06.28: [ 8384]: --> [29:+FCSI: "       972 3 7533362"]
Feb 13 19:32:06.58: [ 8384]: --> [22:+FDIS: 1,5,0,2,1,0,0,4]
Feb 13 19:32:14.59: [ 8384]: --> [22:+FDCS: 1,5,0,2,0,0,0,3]
Feb 13 19:32:14.81: [ 8384]: --> [7:CONNECT]
Feb 13 19:32:14.81: [ 8384]: SEND wait for XON
Feb 13 19:32:14.81: [ 8384]: --> [1:]
Feb 13 19:32:58.53: [ 8384]: <-- data [1039]
Feb 13 19:32:58.80: [ 8384]: <-- data [1033]
Feb 13 19:32:59.07: [ 8384]: <-- data [1030]
Feb 13 19:32:59.34: [ 8384]: <-- data [1026]
Feb 13 19:32:59.61: [ 8384]: <-- data [509]
Feb 13 19:32:59.88: [ 8384]: SENT 83453 bytes of data
Feb 13 19:32:59.88: [ 8384]: <-- data [2]
Feb 13 19:33:00.55: [ 8384]: SEND end page
Feb 13 19:33:00.55: [ 8384]: --> [82:$PH׶DID2ջ+HjCE&r  mu%*VE00k:jh{L0aa]
Feb 13 19:33:00.55: [ 8384]: --> [110:DFnuIEN{mL0ND敎ʅ1pԅ.{:r:)rDn.,P} mL jPbygk^N\49F!‘]
Feb 13 19:33:00.55: [ 8384]: --> [55:F\p?dG=\&rXF5<O8#8#O4	4h|]
Feb 13 19:33:00.55: [ 8384]: --> [409:d55QÐqd@:]6sݸ757.w57]kanjs70skj`B!;2@l+]rEյ]Ω\<r7QBD*(Jo+*uߎab{_Svws]vapv_gs;Zr¥h~Zu\g'DBt(@l#hEߧ_x	 "傕x^JWx`M$GAR]W]/*h-/*Pxѻ\u6{%{VRN	)3$[@}Wr]^T{!HܢrY+5@}f1lJ`TJC+C+%=!EċWC]W]
Feb 13 19:33:00.55: [ 8384]: --> [128:I00zyMUJ]hehأ"TEu9Ghԥ0A@M]«MUGTu][]^JJp/Jn1Q+-JRd 07U4^컾+Q)]
Feb 13 19:33:00.55: [ 8384]: --> [173:gG;*$E%o/;/R8&`瞹EGݻRE]+M\4r{1uQQv8׺I0`N-:7}u5wuu{x}+Zxssx}5/<J]j``oA|RMo]
Feb 13 19:33:00.55: [ 8384]: --> [24:x]A`okN+]
Feb 13 19:33:00.56: [ 8384]: --> [154:I0ai3@}߂}_Grnӡ-^k7owUA>PLCM͋߷RRԣL=JwEUNa#ꞥeDL@0`U,676Lؐ	`A%C+]
Feb 13 19:33:00.56: [ 8384]: --> [121:	XV0Q`}{+lML5(Am(6 m`oS;`&T8LR0l:hִML0K[6A0QXlmD4lXfM]
Feb 13 19:33:00.56: [ 8384]: --> [9:+FHNG: 43]
Feb 13 19:33:00.56: [ 8384]: REMOTE HANGUP: DTE to DCE data underflow (code 43)
Feb 13 19:33:02.56: [ 8384]: <-- [4:ATH0]
Feb 13 19:33:02.82: [ 8384]: --> [2:OK]
Feb 13 19:33:02.82: [ 8384]: SESSION END
Feb 13 20:33:10.75: [ 8961]: SESSION BEGIN
==============================================================================

10x in advanced

------------------------------------------------------------
| Dror Ben-Shlomo - Unix Administrator                     |
| email:          dror@sela.co.il                          |
| address:        Dror Ben-Shlomo, Sela LTD.               |
|                 10 Ha-Kishon St., Bnei Brak 51203 Israel |
| phone:          +972-3-6190999                           |
| fax:            +972-3-6190992                           |
------------------------------------------------------------
Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services