|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: An error - Why
----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Content-Lines: 37
> From owner-flexfax@celestial.com Wed Jan 15 08:13:35 1997
> Sender: owner-flexfax@celestial.com
> Subject: Re: An error - Why
> To: uri@harmonic.co.il (Uri Shkolnik)
> Date: Fri, 10 Jan 1997 17:15:23 +0100 (MET)
> Cc: flexfax@sgi.com
> From: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
> Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
> Organization: SoftcoN GmbH
> Phone: +49 89 61308-51 (company)
> Operating-System: UNIX_SV 4.2 1
> X-Mailer: ELM [version 2.4 PL23]
> Mime-Version: 1.0
> Content-Type> : > text/plain> ; > charset=ISO-8859-1>
> Content-Transfer-Encoding: 8bit
> Sender: owner-flexfax@celestial.com
> Content-Length: 1023
>
> Uri Shkolnik wrote:
>
> Hi,
>
> My system: SunOs4.1.4/Sparce20, Hylafax 4.0 (bin).
> My modem: MULTI-TECH SYSTEMS MT2834ZDXI/0312
>
> I get this error:
>
> Jan 10 01:51:14 sun FaxGetty[191]: <-- [31:AT+FLID="Harmonic Lightwaves "\r]
> Jan 10 01:51:14 sun FaxGetty[191]: --> [2:OK]
> Jan 10 01:51:14 sun FaxGetty[191]: <-- [18:AT+FAA=0+FCLASS=2\r]
> Jan 10 01:51:14 sun FaxGetty[191]: --> [5:ERROR]
> Jan 10 01:51:14 sun FaxGetty[191]: MODEM Command error
I'm attaching a config file that works for me on SunOS 4.1.4 with a MultiTech
MT2834ZDX.
----------
X-Sun-Data-Type: default
X-Sun-Data-Description: default
X-Sun-Data-Name: config.mt2834
X-Sun-Content-Lines: 87
# $Header: /usr/people/sam/irix/fax/config/RCS/mt-1432,v 1.22 1996/01/19 06:33:32 sam Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX modems.
#
# MT1432 firmware rev 0307 I or newer
# MT132BG rev 0109A
# MT1932ZDX rev 0109H
#
# Note that MT1432 modems come in several varieties:
#
# MT1432BA uses Rockwell data pump
# MT1432BA/A uses AT&T data pump
# MT1432BG MT1432BA tweaked for German FCC
# MT1432MK (for UK?)
#
# The modem has been tried with both XON/XOFF and RTS/CTS flow
# control; this configuration is for hardware flow control.
#
#
CountryCode: 1
AreaCode: 508
FAXNumber: +1.508.453.2906
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "DIAL.38400 -"
LocalIdentifier: "AOI INTERNATIONAL"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 38400 # lock rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemHardFlowCmd: AT&E4 # hardware flow control
ModemSoftFlowCmd: AT&E5 # software flow control
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
Class2RecvDataTrigger: "\022" # character sent to modem to start recv
#
# use rtscts for data connections
#ModemAnswerDataBeginCmd: "+++AT&E4O\n<waitfor:CONNECT>"
