faxmail problem

[Marcello Torriani <torriani@ariadne.it>]

I have just installed the package for solaris (hylafax v4.0pl0 binary
1.0) and it works fine.
the only problem is faxmail that seems not to work properly.
this is what I have done:
- generated a mail message with netscape with a postscript attached
- processed this mail message with faxmail
- viewed the result to verify that the postscript attached was there (ok
was there)
- printed the result, viewed the result with ghostscript and so on, but
the attached postscript was invisible (or very little)

anyone can help me ?

thanks in advance
Mt
-- 
Marcello Torriani

Consulting                               voice:  +39 382 40 75 38
Ariadne                                  fax:    +39 382 40 74 50
via Campeggi 13                          e-mail: torriani@ariadne.it
27020 Torre d'Isola (PV) - ITALY         web: http://www.ariadne.it/
web mirror:      http://www.cib.unibo.it/guests/ariadne/Welcome.html
X-POP3-Rcpt: philw@derrick
Sender: owner-flexfax@celestial.com
Date: Tue, 14 Jan 1997 07:54:51 -0800 (PST)
From: Ricardo Kleemann <ricardo@americasnet.com>
To: Howard Moftich <howardm@lsil.com>
cc: flexfax@sgi.com
Subject: Re: how to change baud rate for sendpage 
Sender: owner-flexfax@celestial.com

Thanks! :)

Anyone have the commands that would apply to a Cardinal (Rockwell chipset)
modem?



On Tue, 14 Jan 1997, Howard Moftich wrote:

> 
> I do this in the config file.
> 
> PagerSetupCmds:         ATS50=2S180=0   # 1200 baud, no error control
> 
> but your modems command set is probably different than mine (a Telebit)
> -- 
> 
> +----------------------------------------------------------------+
> | Howard Moftich                                                 |
> | Manager, U.S. Compute Resources                                |
> | Snailmail:   LSI Logic Corp.        Internet: howardm@lsil.com |
> |              9 Hillside Ave.               Phone: 617.890.0180 |
> |              Waltham, MA 02154 USA           FAX: 617.890.6158 |
> +----------------------------------------------------------------+
> -----BEGIN PGP PUBLIC KEY BLOCK-----
> Version: 2.6.2
> 
> mQCNAy9U/yEAAAEEAJp1sat1UmX7PReDe6YbgSBjsQKd6e7XbufIRBUnBEc3zwQ/
> 8iEsr5jEWTCHlkjZfX+nP7/xrovGcbjGNd4TlUgnb96nUmdfXUpEy0GqcuNhj9Wo
> WxCWXBw0zcyqF1L8N8Otgk87qzS429o6XJ9ehfDhWiWLAoVGOdGfflQdHoZdAAUR
> tCFIb3dhcmQgTW9mdGljaCA8aG93YXJkbUBsc2lsLmNvbT4=
> =C7jT
> -----END PGP PUBLIC KEY BLOCK-----
> 
> 
> 
>