|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Phase Errors & ZyXEL
Configuration:
Linux 2.0.27 (on a 486DX33)
HylaFax 4.0pl1
ZyXEL 1496E+ modem with 6.14 ROMs
When a fax is sent from certain fax machines and fax modems (one is a
USR Sportster 14400) to my fax server, the machines connect but fail
regularly with a Phase B error. Here is a sample log:
-------------
Jan 06 23:27:05.40: [17255]: SESSION BEGIN 00000058 13069667379
Jan 06 23:27:05.41: [17255]: <-- [4:ATA\r]
Jan 06 23:27:16.26: [17255]: --> [11:CONNECT FAX]
Jan 06 23:27:16.37: [17255]: MODEM input buffering enabled
Jan 06 23:27:16.37: [17255]: RECV FAX: begin
Jan 06 23:27:16.38: [17255]: --> [5:+FCON]
Jan 06 23:28:14.62: [17255]: --> [8:+FHNG:70]
Jan 06 23:28:14.80: [17255]: REMOTE HANGUP: Unspecified Receive Phase B error (code 70)
Jan 06 23:28:14.80: [17255]: --> [2:OK]
Jan 06 23:28:14.80: [17255]: RECV FAX: Unspecified Receive Phase B error
Jan 06 23:28:14.80: [17255]: RECV FAX: end
Jan 06 23:28:14.81: [17255]: SESSION END
-------------
Does anyone have any ideas? Sending faxes works beautifully...
---------------------------------------------------------------------
- Matt White whitem@arts.usask.ca -
- Network Technical Support http://arts.usask.ca/~whitem -
- College of Arts & Science University of Saskatchewan -
---------------------------------------------------------------------
I used to think they were after me...
But they're just after my recipe.
- Joe Diffie..."Good Brown Gravy"
